4 Flow Matched OEM Genuine Ford Bosch 24 lb/hr Fuel Injectors PN 0280156162
This is a set of 4 Bosch 0280156162 Injectors that will fit 05-07 Ford and Mercury with the 2.0l and 2.3l engine. These cars also featured the Bosch 0280156161 injector so please make sure you are ordering the correct set.
The injectors have been ultrasonically cleaned, spray pattern/flow tested, pressure tested to ensure no leaks and then rebuilt with new Viton O-rings, micro filters and pintle caps.
These injectors will act brand new at cheaper price then buying them new. Injectors may have some cosmetic flaws such as discoloration and small scrapes on the body but it does not affect the function of the injector.
All injector sets are matched within 2% and flow at the stock flow rate unless otherwise noted. Injectors come with a 2 year warranty against all defects!
8 Chevy Vortec Spider Injection FULL Rebuild Kit Oring 5.7l Vortec SCPI CPI V8
Only a few left!
This is a full rebuild kit for V8 Chevy / GMC Vortec Spider Injection set ups. These are featured on the 5.7l (V8 This kit) or 4.3l (V6 Check my other listings) from 1996 -2002. This kit is a full overhaul of the injectors featured in the spider injection system.
This kit includes
8 Poppet Nozzles
8 Plastic Spacers
8 Upper Viton O-rings
8 Lower Viton O-rings
8 Injector Filters
Does NOT come with the spider injector pictured or the hoses
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
6 Chevy Vortec Spider Injection FULL Rebuild Kit Oring 4.3l Vortec SCPI CPI V6
Sold out
This is a full rebuild kit for V6 Chevy / GMC Vortec Spider Injection set ups. These are featured on the 4.3l (V6 This kit) or 5.7l (V8 Check my other listings) from 1996 -2002. This kit is a full overhaul of the injectors featured in the spider injection system.
This kit includes
6 Poppet Nozzles
6 Plastic Spacers
6 Upper Viton O-rings
6 Lower Viton O-rings
6 Injector Filters
Does NOT come with the spider injector pictured or the hoses
Please make sure you Poppets look like the ones in the picture. This kit does NOT fit the ones with the shorter poppets. If you need verification I can assist you.
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
Yamaha Outboard Motor Fuel Injector Basket Filter HPDI - Mystery Filter Set of 8
This is a set of 8 micro basket filters which are found in Yamaha part number 68F139101000 fuel injectors. They fit Yamaha outboard motors 2000 and up HPDI LZ, Z 150hp 175hp and 200hp and should also fit VZ models. These are the correct 14mm filter that come in the stock injectors and in the HP pumps. The amount of filters you will need varies on your model and number of injectors, this is for 8 but I also have another listing with 6 filters.Filters may be white but are the same exact thing besides the color.
I also sell most fuel injectors that fit the models above if you think you need more of a tune up than just filters!
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
Please ask questions as needed and please check out my other listings, I strive for 5 star/100% feedback so if you are not 100% satisfied please contact me first.
Fuel Injector Rebuild Kit O-rings Filters Pintle V8 Chevy GMC 4.8 5.3 6.0 Delphi
Only a few left!
Toyota Fuel Injector Denso O-Ring / Repair Kit Set of 4 Camry Corolla Prius
Only a few left!
This is a fuel injector repair / rebuild kit for most older style Denso injectors featured on most older Toyota's. This will also fit 2001 to 2009 Prius with the 1.5l
Kit Includes
- 4 Micro Filters (this is the most common style and will fit most injectors described)
- 4 Plastic Rings (Not needed in some applications)
- 4 Upper Viton O-rings
- 4 Rail Spacers
- 4 Lower Grommets
- (Injector pictured is for reference only and is not included in the sale)
The injector described are most common on older model Toyota's with the 2.0, 2.4, 2.6 and 2.8l Engines. I can make a V6 order if you need to rebuild a set off of the 3.0l cars. Please use the injector in the picture for reference.
Mitsubishi Evo 8 9 Evolution Fuel Injector O-Ring Repair / Rebuild Kit Set of 4
Only a few left!
This is a Fuel Injector Service Kit For Evo 8 and 9 stock injectors.
This kit comes with pintle caps, upper seals, upper o-rings and filters. All contents in this kit are brand new are used for servicing stock Evo 8 and 9 stock injectors. IT may service aftermarket Injectors as well but please do your own research first.
-Kit Includes
- 4 Pintle Caps
- 4 Upper Grommets
- 4 Upper O-Rings
- 4 Injector Filters
- Now comes with the 4 Lower seals that go over the Pintle caps(Injector pictured is for reference only and is not included in the sale)
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
Ford Mustang 1987-03 Fuel Injector Rebuild / Repair Kit O-Rings Filters 8Cyl
Only a few left!
This is an injector rebuild kit for 1987 - 2003 Ford Mustang injectors. These are the ones with Bosch 0280150xxx equipped injectors from the 4.6l and 5.0l motors. Please use the picture for a reference and make sure it is the same style injectors.
This kit includes...
- 8 Pintle Caps
- 8 Upper Plastic Rings
- 8 Lower Plastic Spacers
- 8 Upper O-Rings
- 8 Lower Orings
- 8 Injector Micro Filters
- (Injector pictured is for reference only and is not included in the sale)
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
Suzuki Hayabusa GSXR1300R 600 750 Fuel Injector Rebuild Kit O-Rings Filters Seal
Only a few left!
This is a fuel injector service / rebuild kit for 99-03 Suzuki Hayabusa GSXR1300R that have Keihin Fuel Injectors. Will also fit 00-03 GSXR 750, 01-03 GSXR 600 and 01-02 GSXR 1000. Please make sure your injector looks like the one in the picture!
This kit includes
- 4 Viton Orings
- 4 High Flow Honda Micro Filters
- 4 Upper Rail Spacers
- 4 Lowe Viton Grommets
- Injector Pictured is for reference only and is NOT included in the sale.
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
DSM Eclipse Talon Fuel Injector O-Rings Rebuild Repair Kit 450cc Blue Black Top
Only a few left!
This is a Fuel Injector Service Kit For Nikki Fuel Injectors INP-009 INP-018
This kit comes with pintle caps, upper and lower seals, upper o-rings and filters. All contents in this kit are brand new are used for servicing stock 450cc DSM Blue and Black* Top Injectors as well as Grey 390cc out of 1g automatics. This is the most complete kit you can get for these injectors.
*Using these pintle caps on black top 450s will make them a single spray pattern (Preferred in non OEM applications)
-Kit Includes
- 4 Pintle Caps
- 4 Upper Grommets
- 4 Upper O-Rings
- 4 Lower Grommets
- 4 Injector Filters
- (Injector pictured is for reference only and is not included in the sale)
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
03 - 07 Suzuki GSXR600 GSXR750 SV650 DL650 Fuel Injector Rebuild / ORing Kit
Only a few left!
This is a fuel injector service kit for 2003 - 2007 Suzuki GSXR600 GSXR750 SV650 DL650 V-Storm. The injector has number 25033F and is PN 15710-17G00. This is the same style also featured on Suzuki Boulevard 1800s from 06 - 15 with PN 15710-48G00 (Grey in color). Will fit both upper and lower injectors on GSXR's. Will need 2 sets if doing upper and lower injectors.
This kit includes...
- 4 Upper Viton Orings
- 4 Micro Filters
- 4 Lower injector seats
- Injector pictured is NOT included in the sale and is only for reference.
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
DSM 3000gt Fuel Injector O-Ring Repair Kit 450cc, 390cc Blue Black Top Set of 6
Only a few left!
This is a Fuel Injector Service Kit For Nikki Fuel Injectors INP-009 INP-018 This kit is geared towards Mitsubishi 3000gts and other cars that run 6 of the Nikki style injectors so you dont have to buy 2 kits of 4. If you only need 4 please look at my other listing!
This kit comes with pintle caps, upper seals, upper o-rings and filters. All contents in this kit are brand new are used for servicing stock 450cc DSM Blue and Black* Top Injectors as well as Grey 390cc out of 1g automatics.
*Using these pintle caps on black top 450s will make them a single spray pattern (Preferred in non OEM applications)
-Kit Includes
- 6 Pintle Caps
- 6 Upper Fuel Rail Spacers
- 6 Upper O-Rings
- 6 Injector Filters
- 6 Lower Seals (Not pictured)
- (Injector pictured is for reference only and is not included in the sale)
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
Fuel Injector Rebuild Kit ORing Filt Pintle Polaris 800 700 Ranger Sportsman RZR
This is a fuel injector service / rebuild kit for Bosch 0280156208 injectors. This services 2 injectors commonly found on Polaris 800 and 700 machines including Sportsman, Ranger and RZR, from year 2005 to 2014. IT will fit most not all from those years so please use the picture and part number to verify.
This kit includes
- 2 Pintle caps
- 2 Micro Basket Filters
- 2 Upper Viton O-rings
- 2 Lower VIton O-rings
- Injector pictured is for reference only and is NOT included in the sale.
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.