- O-Ring Kits
- >
- 8 Chevy Vortec Spider Injection FULL Rebuild Kit Oring 5.7l Vortec SCPI CPI V8
8 Chevy Vortec Spider Injection FULL Rebuild Kit Oring 5.7l Vortec SCPI CPI V8
This is a full rebuild kit for V8 Chevy / GMC Vortec Spider Injection set ups. These are featured on the 5.7l (V8 This kit) or 4.3l (V6 Check my other listings) from 1996 -2002. This kit is a full overhaul of the injectors featured in the spider injection system.
This kit includes
8 Poppet Nozzles
8 Plastic Spacers
8 Upper Viton O-rings
8 Lower Viton O-rings
8 Injector Filters
Does NOT come with the spider injector pictured or the hoses
Professional instillation recommended, I am not responsible for mistakes due to lack of knowledge about rebuilding / replacing parts on injectors.
LS1 to LS2/LS3 Injector Adapters Bosch EV1 (Jetronic) to EV6/EV14 (USCAR) x8
Sold out
This is a set of 8 EV1 (Jetronic) to EV6/EV14 (USCAR) adapters.
This is for converting your Bosch EV1 style harness (Jetronic LS1 / LS6 and LT1) to fit the newer style Bosch EV6 and EV14 injectors (USCAR LS2 / LS3 / LS7) This will also fit many other aftermarket injectors that are used on LS swaps but please so your research before you purchase.
Injector connectors come with a 2 year warranty against all defects!
6 Chevy Vortec Spider Injector Poppet Clips for 4.3l & 5.7l Vortec SCPI CPI
This is a set of 6 Chevy / GMC Vortec Spider Injection retainer clips. These are featured on the 4.3l (V6 This kit) or 5.7l (V8 Check my other listings) from 1996 -2004. These are common items to break as they get brittle over time and are not commonly found at your local parts store. There are 2 styles so please verify that yours look like the ones in the picture.
I also have full spider injection rebuild kits listed on this site!
Set of 8 Chevy Spider Injector Poppet Clips for 4.3l & 5.7l Vortec SCPI CPI
Only a few left!
This is a set of 8 Chevy / GMC Vortec Spider Injection Poppet clips. These are featured on the 4.3l (V6 Check out my other listings) or 5.7l (V8 This Kit) from 1996 -2004. These are common items to break as they get brittle over time and are not commonly found at your local parts store.
I also have full spider injection rebuild kits listed in my store!
Set Of 6 New Vortec Central Port Spider Fuel Injectors Poppet Retainer Clips CPI
Only a few left!
This is a set of 6 Chevy / GMC Vortec Spider Injection retainer clips. These are featured on the 4.3l from 1992 to 1995. These are common items to break as they get brittle over time and are not commonly found at your local parts store. There are 2 styles for the V6 so please verify that yours look like the ones in the pictures.
Lot of 25 Vortec Central Port Spider Fuel Injectors Poppet Retainer Clips CPI
Only a few left!
This is a lot of 25 Chevy / GMC Vortec Spider Injection retainer clips. These are featured on the 4.3l (V6) of 5.7l (V8) from 1996 -2004. These are common items to break as they get brittle over time and are not commonly found at your local parts store. There are 2 different styles so please verify these are the correct ones you need. I also have a set of 6 of these listed. This is a great lot for auto shops
Set Of 8 Injector Tips MPFI Spider Injector 1995-2002 GMC / Chevy 5.7L V8
Only a few left!
This is a set of 8 Chevy / GMC Vortec Spider Injection Poppet clips. These are featured on the 4.3l (V6 Check out my other listings) or 5.7l (V8 This Kit) from 1996 -2004. These are common items to break as they get brittle over time and are not commonly found at your local parts store. This is for the 3rd generation injector style tips that are commonly upgraded in the older years.
I also have full spider injection rebuild kits listed in my store!
Stainless Steel Allen Head Valve Cover Bolt Kit (90-99 DSM 4g63) FREE SHIPPING
Only a few left!
For sale is a Valve Cover allen head bolt kit for DSM ( Eclipse, Talon, Laser) with a 4g63(T) Motor. This is a SS kit that comes with the necessary allen head bolts and washers to dress up your valve cover or simply to replace the old rusty ones holding it down now.
Please ask questions as needed!
Set of 4 Fuel Injector Locks / Fuel Rail Clip / Retainer Kit Universal Bosch +
Only a few left!
These are anodized clips so they will not rust over time! This is a set of 4.
These will fit nearly all fuel injectors including Bosch injectors on Ford, GM, Chrysler, Mercedes BMW along with many more. Most EV1 - EV6 and EV14 use the style clips as well. Please compare yours with the ones in the picture to make sure they are similar. These are the same as the rounder style with the ridge aswell.
EV1 Fuel Injector Quick Disconnect Pigtails Set of 8 Ford Bosch DSM Siemens Deka
Only a few left!
This is a set of 8 EV1 (Jetronic) fuel injectors quick disconnect pigtails. These connectors have 4" of wires so you can easily splice them in to you existing wire harness.
These style plugs are featured on many makes and models including Ford, Dodge (Using metal body Siemens Deka Injectors) Mitsubishi (Using Nikki metal body injectors) Audi and Volkswagen (Using metal body Siemens Deka Injectors) along with many others.
I have sets of 4, 6 and 8 EV1 connectors with pigtails along with EV6 connectors with pigtails, Denso style connectors with pigtails and LS1 to LS2/LS3 adapters.
8 Denso Female to EV1 Male Fuel Injector Connector Electrical Plug Clip Adapter
Only a few left!
This is a set of 8 Denso Female to EV1 Male Fuel Injector quick disconnect pigtails. These connectors have 4" of wire so you have a little room to play with your set up. I have sets of 4 6 and 8 of these connectors.
I also have sets of 4, 6 and 8 of EV6 connectors with pigtails, EV1 connectors with pigtails, Denso style connectors with pigtails and LS1 to LS2/LS3 adapters.
Injector connectors come with a 2 year warranty against all defects!
EV6 Fuel Injector Quick Disconnect Pigtails Set 4 USCAR Ford Bosch Siemens Deka
Only a few left!
This is a set of 4 EV6 (USCAR) fuel injectors quick disconnect pigtails. These connectors have 4" of wires so you can easily splice them in to you existing wire harness.
These style plugs are featured on many makes and models including Ford (using some plastic Bosch injectors), Dodge (Using plastic body Siemens Deka Injectors) along with many others.
I have sets of 4, 6 and 8 EV6 connectors with pigtails along with EV1 connectors with pigtails, Denso style connectors with pigtails and LS1 to LS2/LS3 adapters
EV6 Fuel Injector Quick Disconnect Pigtails Set 8 USCAR Ford Bosch Siemens Deka
This is a set of 8 EV6 (USCAR) fuel injectors quick disconnect pigtails. These connectors have 4" of wires so you can easily splice them in to you existing wire harness.
These style plugs are featured on many makes and models including Ford (using some plastic Bosch injectors), Dodge (Using plastic body Siemens Deka Injectors) along with many others.
I have sets of 4, 6 and 8 EV6 connectors with pigtails along with EV1 connectors with pigtails, Denso style connectors with pigtails and LS1 to LS2/LS3 adapters.